}
Creative Army
Creative Army Jumbo Jet - SLX
Creative Army Jumbo Jet - SLX
Couldn't load pickup availability
Check out these real-life scenarios: You feel under volumed and the struggle of paddling is real. You catch the wave but the surfboard so unstable you can't get to your feet. Your home break is weak and small most of the time. You are a big human that can still surf really well but there's not a surfboard out there that has enough foam/volume for you. If you are relating to any of these scenarios then the Jumbo Jet is here to get you fully stoked.
If you are looking to buy this board online use the VIP code SURFICA15 to receive 15% off all Surfica accessories; leashes, boardbags and traction pads.
SHIPPING INFORMATION
SHIPPING INFORMATION
Shipping from our main warehouse is:
SYDNEY METRO:
Acc/Paddles/Bags: FREE
Surfboard under 8'5": $25
Surfboard 8'6" & over: $25
SUP: $25
REST OF NSW/ACT:
Acc/Paddles/Bags: FREE
Surfboard under 8'5": $45
Surfboard 8'6" & over: $80
SUP: $140
VIC:
Acc/Paddles/Bags: FREE
Surfboard under 8'5": $55
Surfboard 8'6" & over: $100
SUP: $180
SA:
Acc/Paddles/Bags: FREE
Surfboard under 8'5": $60
Surfboard 8'6" & over: $110
SUP: $200
QLD:
Acc/Paddles/Bags: FREE
Surfboard under 8'5": $65
Surfboard 8'6" & over: $120
SUP: $220
WA/NT/TAS:
Acc/Paddles/Bags: FREE
Surfboard under 8'5": $85
Surfboard 8'6" & over: $160
SUP: $300
Shipping from our Outlet Store is slightly more expensive to cover the repackaging of the boards is:
SYDNEY METRO:
Acc/Paddles/Bags: FREE
Surfboard under 8'5": $25
Surfboard 8'6" & over: $25
SUP: $25
REST OF NSW/ACT:
Acc/Paddles/Bags: FREE
Surfboard under 8'5": $60
Surfboard 8'6" & over: $95
SUP: $155
VIC:
Acc/Paddles/Bags: FREE
Surfboard under 8'5": $70
Surfboard 8'6" & over: $115
SUP: $195
SA:
Acc/Paddles/Bags: FREE
Surfboard under 8'5": $75
Surfboard 8'6" & over: $125
SUP: $215
QLD:
Acc/Paddles/Bags: FREE
Surfboard under 8'5": $80
Surfboard 8'6" & over: $135
SUP: $235
WA/NT/TAS:
Acc/Paddles/Bags: FREE
Surfboard under 8'5": $100
Surfboard 8'6" & over: $175
SUP: $315
Check out these real-life scenarios: You feel under volumed and the struggle of paddling is real. You catch the wave but the surfboard so unstable you can't get to your feet. Your home break is weak and small most of the time. You are a big human that can still surf really well but there's not a surfboard out there that has enough foam/volume for you. If you are relating to any of these scenarios then the Jumbo Jet is here to get you fully stoked.
The Jumbo Jet has a 2 + 1 fin set up that turns easily thanks to the smooth lines of the round tail. Complimented by a tucked edge in the tail and modern rocker the Jumbo Jet accommodates the surfer that wants to go down the line, hit the section and move the board where ever it needs to go.
Throw in a little nose concave to help create lift for those heavier surfers allowing them to nose ride like a champ. The Jumbo Jet goes well in all conditions from small crappy beach breaks to beautiful points and steeper more challenging waves.
The shorter versions of the Jumbo Jet (7'2 and 8’0) will work a treat, they’re like the 'big guys' shortboard. These boards are for anyone that needs a little bit of help increasing their wave count. The extra volume allows you to paddle with ease, get in early and give you more time to get to your feet. I'm so stoked on this board it's got my Dad back in the water in his Mid 60's after 10 years out due to injuries and it has got him frothing. Hope you get the same stoke. Enjoy! Josh
NOTE: Rider weight is based on board volume and intermediate rider skill level
| LENGTH | WIDTH | THICK | VOLUME | FINS | APPROX WEIGHT RANGE |
|---|---|---|---|---|---|
| 7'2 | 23 1/2" | 3 1/2" | 65.28ltr | 7" CA Custom Fin (supplied) w/ FCSII Performer sides (rcmd) | 85kg or less |
| 8'0 | 23 11/16" | 3 5/8" | 78.05ltr | 7" CA Custom Fin (supplied) w/ FCSII Performer sides (rcmd) | 85kg + |
| 9'0 | 24 1/16" | 3 7/8" | 97.05ltr | 8" CA Custom Fin (supplied) w/ FCSII Performer sides (rcmd) | ideal for all weights |
| 9'6 | 24 1/4" | 4" | 106.36ltr | 8" CA Custom Fin (supplied) w/ FCSII Performer sides (rcmd) | ideal for all weights |
| Construction | SLX Epoxy SLX construction produces a controlled flex pattern by combining the versatility of epoxy materials with the added advantage of reduced weight. All SLX boards have an EPS core with a high-grade timber stringer, which is laminated by hand using epoxy resign, biaxial fiberglass and a specialized construction process. Featuring a high strength-to-weigh ratio, and designs CNC milled directly from the shapers files. SLX boards feel light, responsive and are very sensitive under your feet. These boards are extremely versatile, easy to ride, and can be used in wide variety of conditions. |
| Board Contours | Modern Contours |
| Rail | Neutral Rail |
| Surfer Skill Level | Intermediate - Advanced |
| Wave Height | 0-6ft |