This SUP Pump adapter is made of high quality copper and rubber materials, it is quite sturdy and durable. SUP electric pump adaptor utilizes a standard valve fitting to couple with an air compressor or bike/tire pump.

With your ISUP valve in the closed position, insert the Schrader valve fitting and rotate to lock in place. Remove the cap on the fitting, and connect a standard electric pump. Because the compressors/tire pumps take time to inflate, it is recommended to inflate the board by hand until it becomes difficult to pump, and then use the adaptor to top off the pressure.
This inflatable SUP valve adapter has easy conversion, and the efficiency of its inflation is quite high. Use your compressor or tire pump to easily reach suggested PSI within 5-10min.
Adopt fine workmanship and delicate design, convenient to use. Lightweight and portable, individual sealed package, easy to use and carry.
No need for paddle-specific air pump, the conversion head can connect the ordinary inflatable tube to the paddle.Widely applicable to various canoe, kayak, paddle board, inflatable boat etc. Fits all Halkey Roberts H3 Inflation Valves.

WARNING - Do Not Over inflate using a Compressor. Be very careful.
Most iSUP's - Recommended Max Pressure is 15-18psi

**Disclaimer: Global Surf Industries will not be held responsible for any damage caused to an ISUP due to over inflation or any other misuse.

** This product ships for free with Australia Post **

Inflatable SUP - Valve Adaptor

Inflatable SUP - Valve Adaptor

Subscribe to our Newsletter & Win the Surfboard of your choice from our range*.